MT 5100 S2
The next generation: New Inline Homogenizing unit incl. transformer, power cable, ready for App control (100 – 120 V)
When testing and optimizing formulas, high process safety is paramount. This system enables processing of complex material systems with absolutely minimal loss of mass and minimal energy. This pilot plant format production system delivers efficent, replicable results like those of our Inline machines used in large volume production.
BENEFITS
Your pilot plant expert
This system was developed to help you realize your ideas under as realistic conditions as possible in small economic quantities. During subsequent scale-up, the results can be replicated with our large machines. Applications are mainly in recirculation mode.
Depending on the material’s system, the components bind into the finest emulsions or suspensions with droplet or particle sizes down to a few microns. These results are achieved by the machines high speed and the resulting peripheral tip speeds as well as precise rotor / stator geometry. Depending on the material’s system being process, the desired fineness is achieved after a certain period of recirculations and / or using other rotor / stator geometries.
TECHNICAL INFORMATION
-
1200
-
up to approx. 75 l/min
-
Eight different rotor/stator variants, single-stage
-
Single-phase (standard version) / Multi-phase (with optional injector)
-
Inline product processing / Primarily used in recirculating operations
-
Horizontal, single-stage arrangement / Working pressure up to 6 bar / Working temperature up to 90 °C / Quick coupling for easy disassembly / Single-acting mechanical seal with pressureless
-
High-quality 316L stainless steel / Product contact parts electropolished / Standard Ra ≤ 1.6 μm
-
Standard & customized selection of recirculation systems
-
1500 W wear-free high-frequency AC motor / Gearless direct drive / Continuous speed control / Completely enclosed in stainless steel
-
up to 21 000 rpm
-
< 62 dB(A) at 21 000 rpm (w/o load)
-
100 – 230 V ± 10 %, 50Hz / 60Hz
-
80 % in storage / 80 % during operation
-
0 – 40 °C
-
IP 20
-
324 x 255 x 322 mm
-
21.2 kg
-
IEC / EN 61000-6-2 / EN 61000-6-3
-
IEC / EN 61010-2-51
RECOMMENDATIONS
-
TS 1 StandardQuench systems for MT 5100 S2 - PMMATS 1 PTFEQuench systems for MT 5100 S2 - PFTES-DN15Hose nipple connectionMR-DN15Milk thread connectionsTC-1 / 2“ EPDMTri-clamp / Tube connections TC 1/2" / ø13/8 EPDM Seals ( MT 3100 S2 )Cooling jacket setFor MTO 5100 Q-VMobile kitFor MT 5100 S2 with swivel castorsInlet flangewith injector and needle valve MTO / MTK 5100 QMTO 5100 Q-VWorking chamber for MT 5100 S2 / Standard (w / o heating / cooling jacket)MTO 5100 Q-EWorking chamber for MT 5100 S2 / Standard (w / o heating / cooling jacket)MTO 5100 Q-K6375Working chamber for MT 5100 S2 / Standard (w / o heating / cooling jacket)MTO 5100 Q-K6230Working chamber for MT 5100 S2 / Standard (w / o heating / cooling jacket)MTK 5100 Q-VWorking chamber for MT 5100 S2 / Standard (with heating / cooling jacket)MTK 5100 Q-EWorking chamber for MT 5100 S2 / Standard (with heating / cooling jacket)MTK 5100 Q-K6375Working chamber for MT 5100 S2 / Standard (with heating / cooling jacket)MTK 5100 Q-K6230Working chamber for MT 5100 S2 / Standard (with heating / cooling jacket)MTO 5100 Q-E-AWorking chamber for MT 5100 S2 / Autoclavable version (w / o heating / cooling jacket)MTO 5100 Q-K6375-AWorking chamber for MT 5100 S2 / Autoclavable version (w / o heating / cooling jacket)MTO 5100 Q-K6230-AWorking chamber for MT 5100 S2 / Autoclavable version (w / o heating / cooling jacket)MTK 5100 Q-E-AWorking chamber for MT 5100 S2 / Autoclavable version (with heating / cooling jacket)MTK 5100 Q-K6375-AWorking chamber for MT 5100 S2 / Autoclavable version (with heating / cooling jacket)MTK 5100 Q-K6230-AWorking chamber for MT 5100 S2 / Autoclavable version (with heating / cooling jacket)